DST Products

DST offers a range of inks & adhesives for the production of DST transfers and traditional transfers. Besides the printable adhesives that offers excellent stretch, durability and wash resistance, DST also offers a range of powder adhesives that are compatible with the white and clear ink used for the digital transfer production.

All inks and adhesives are thoroughly tested with prints from the different digital presses to ensure the production of high quality transfers the can pass the different test required by the end users.

DST Release Liners

Rolls

DST TRF foil, 36 micron gloss polyester

  • 330mm web width and 500mm web width
  • For the Xeikon presses

DST HPI-TRF foil, 100 micron semi gloss polyester

  • 330mm web width and 500mm web width
  • For the Xeikon presses

DST HPI-TRF foil, 120 micron full matt polyester

  • 330mm web width and 500mm web width
  • For the Xeikon presses

Sheets

DST Paper, 100gsm

  • A3+, 308mm x 457mm
  • For the Ricoh & Xerox devices

DST Paper, 100gsm

  • 320mm x 488mm
  • Format for the Xerox 5000 engines

DST HPI-Paper, 105gsm

  • 320mm x 460mm
  • For the Series 2 HP-Indigo presses

DST OKI-Paper, 105gsm

  • 308mm x 457mm
  • For the OKI C910 printer

Sheets

DST Paper, 110gsm

  • 308mm x 457mm
  • For the Ricoh and Xerox devices

DST TRF foil, 75 micron semi-matt polyester

  • 308mm x 457mm
  • For the Ricoh and Xerox devices

DST HPI-TRF foil, 75 micron semi-matt polyester

  • 320mm x 460mm
  • For the Series 2 HP-Indigo presses

DST Inks

1005 DST White 003R

A white screen printing ink which is specifically developed for the production of DST transfers. The ink is water based, meaning it does not contain PVC, phthalates or APEO.

1010 DST White EP

A white screen printing ink which is specifically developed for the production of DST transfers. The ink is water based, meaning it does not contain PVC, phthalates or APEO.

The ink is water based, meaning it does not contain PVC, phthalates or APEO.

1025 DST Clear EP

A clear ink meant for the production of transfers that are to be applied to white fabrics or when producing transfers with the toner based engines where there is a request for no white outline. The clear ink is then used in combination with the white ink where the white is printed with an underline, the clear with an outline and then the adhesive is printed.

The ink is water based, meaning it does not contain PVC, phthalates or APEO.

DST Adhesives

DST Bond water based adhesive

This quality does not contain PVC, Phthalates, or solvents. It is meant for leisure wear cotton, cotton blends, nylon and polyester. Wash recommendation is 40-60 degrees C – depending on substrate. This quality can also be dry cleaned.

Recommended application instructions:

  • Temp: 175-180 C. / 347-357 F.
  • Time: 10-15 seconds
  • Pressure: 35-40 PSI

DST PLAS adhesive

This quality is a plastisol based adhesive which is soft and elastic. It is meant for cotton and cotton blends and PVC substrates. Wash recommendations is 60 degrees C. No dry cleaning.

Recommended application instructions:

  • Temp: 170-175 C. / 338-347 F.
  • Time: 12-15 seconds
  • Pressure: 35-40 PSI

DST PLAS-SS Soft adhesive

This quality is a plastisol based adhesive which is soft and elastic. It is meant for cotton and cotton blends, polyester, nylon and PVC substrates. Wash recommendations is 60 degrees C / 140 degrees F. No dry cleaning.

Recommended application instructions:

  • Temp: 170C. / 338 F.
  • Time: 10 seconds
  • Pressure: 35-40 PSI

DST PLAD adhesive

This quality is a plastisol based adhesive meant for work wear garment of cotton and cotton blends, and where high temperature washing is a requirement. Wash recommendation is 90 degrees C / 194 degrees F. Depending on the wash process; it can also withstand industrial washing. No dry cleaning.

Recommended application instructions:

  • Temp: 175-180 C. / 347-357 F.
  • Time: 12-15 seconds
  • Pressure: 35-40 PSI